Xinhui KangYu Control Systems Engineering, Inc.
Model No.: KYN01
Type: Resonant Pressure Sensor
Component: SemiConductor Type
For: Diffused Silicon Pressure Transmitter
Output Signal Type: Analog Type
Production Process: Integration
Material: Stainless Steel
Thread Type: G
Wiring Type: Two-Wire
Measuring Medium: Gas
IP Rating: IP65
Place of Origin: jiangmen guangdong China
Supply Ability: 100pic/month
The main function of this switch is to measure piston movement and send outthe Alarm signal. The surverying rod touches and moves with the measured surface. The output signal will be changed when the surveying rod reach at the warning point 1/2 and the switch will send corresponding control signal.
The indicator is supplied with pre-set switch points to suit the specific brake type and selected pad wear level. FeaturesThe brake indicator is available in 10~36VDC only. The indicator can be delivered with different cable types (non-shielded, shielded or without cable), different cable lengths (5, 10,15m) and M12 plug (angle or straight).
KYN01 brake indicator has been successfully by the relevant agencies CE certification and 3500V resistance voltage insulation test third party inspection certificate.
KYN01 switch indicator is used for monitoring the status of the brake/brake pad:"prepad worn [(Brake pad almost worn) and [pad worn"(Pad replacement required). When the indicator is fitted to the brake a plunger/extender pin (if fitted) extends through a hole in the yoke and touches the brake pad (active brakes) or through the endcap and touches the push rod and detects the range of wear (AWA brake).
The switch has 5 pins, when the switch on off working state, pin 1 and 4 NC, pin 2 and 3 NC, pin 2 and 5 NO. when the probe arrive at the Warning point 1, pin 1 and 4 NC, pin 2 and 3 NC, pin 2 and 5 NO. when the probe arrive at the Warning point 2, pin 1 and 4 NO, pin 2 and 3 NO, pin 2 and 5 NC.
Gross weight:KYN01-B: 0.4kg
KYN01-E: 1 kg
Net weight:KYN01-B: 0.2kg
Product Categories : Displacement Measurement Sensor